Advantage Pool Pumps Bedienungshandbuch PDF herunterladen (Seite 2)

When installing and using this electrical equipment, basic safety precautions should always be

followed, including the following: Failure to follow instructions may result in injury.

READ AND FOLLOW ALL INSTRUCTIONS

IN THIS OWNER’S MANUAL

AND ON EQUIPMENT.

KEEP SAFETY LABELS IN GOOD CONDITION

AND REPLACE IF MISSING OR DAMAGED.

WARNING – To reduce risk of injury, do not permit children to use or climb on this product. The

ANSI/NSPI 4 Standard (above-ground and on-ground pools) advises that components such as the filtration

system, pumps, and heaters be to prevent their being used as a means of access to the pool by young children.

Closely supervise children at all times.

CAUTION – The Advantage Filter System is intended for use on permanently installed above-

ground swimming pools and may also be used with hot tubs and spas if so marked. Do NOT use with storable

pools. A permanently installed pool is constructed in or on the ground or in a building such that it cannot be

readily

disassembled for storage. A storable pool is constructed so that it is capable of being readily

disassembled for storage and reassembled to its original integrity.

Though this product is designed for outdoor use, it is strongly advised to protect the electrical components

from the weather. Select a well-drained area, one that will not flood when it rains. It requires free circulation

of air for cooling. Do not install in a damp or non-ventilated location.

Bond motor to pool structure. Use a solid copper conductor, size or larger. Run wire from external bonding

lug to reinforcing rod or mesh. Connect a No.8 A WG (8.4 mm

) solid copper bonding wire to the pressure

wire connector provided on the motor housing and to all metal parts of swimming pool, spa, or hot tub, and to

all electrical equipment, metal piping or conduit within 5 ft. (1.5 m) of inside walls of swimming pool, spa, or

hot tub. (In Canada use No.6 A WG bonding wire.)

PRODUCT REGISTRATION

(Retain For Your Records)

DATE OF INSTALLATION __________________________________________

INITIAL PRESSURE GAUGE READING (CLEAN FILTER) ________________

PUMP MODEL _____________________ HORSEPOWER ________________

FILTER MODEL ____________________________________________________

POOL PUMPS

ADVANTAGE

IMPORTANT SAFETY INSTRUCTIONS

1 2 3 4 5 6 7 ... 14 15

Keine Kommentare

Advantage Pool Pumps Bedienungshandbuch Seite 2